Insufficient inventory balance for issuing material to the work order

I don't think so , because I checked the activity of the raw material and no activity done , this mean there is something must be adjusted

Thanks for your great efforts

Here is the work flow for Advanced Manufacture (normal assembly takes all in one step):
A work order is created. No further action is taken.
The work order is released. The wo requirements table is updated from the BOM. When looking at the Work Order the required lines with insuffient qoh are marked.
The work order get more issues. The error will display immediately if insuffient qoh for the item issued. If 'Allow negative stock' is not marked in Setup.
The work order is produced.  The error should display telling that there are insuffient qoh for items. If 'Allow negative stock' is not marked in Setup.
I have sent you a file for replacement so this error is showing.
When the work order is produced, the stock moves table is updated and the GL is updated. The stock account for raw materials are credited and the stock account for manufactured items are debited.
The work order gets extra costs. This cost is added to the standard_costs for the manufactured item. GL is updated too.
The work order is closed when the production is done. There can be done no more operations on the work order.
During the period from work order release and to work order close, the reports 302 (Inventory Planning) and 303 (stock check sheet) includes the items in the column 'Supp Ord' or 'On Order' .
BTW. I think we should skip the first button in Work Order Production. Both do the same thing.

/Joe

When choosing advanced manufactured as a type of work order every thing going fine but what about the other two options in the type list “assemble , unassemble” ?
Because when I’m choosing assemble as a type of work order it is showing me that message “The work order cannot be processed because there is an insufficient quantity for component: RM-01 - Raw Material - 01. Location: Warehouse – 01”

there is some strange behavior happening , the assemble type worked with me and then giving me the same message again “The work order cannot be processed because there is an insufficient quantity for component: RM-01 - Raw Material - 01. Location: Warehouse – 01”

I think there is some thing wrong , can you check please one time more and try this maybe you will find bugs

This is really strange. I have just been into the demo data client and created 1 assembly of finished goods - 01 without errors. Look for yourself.

/Joe